- Home
- testo 340
testo 340 - Flue gas analyzer for use in industry
0632 3340testo 340 - Flue gas analyzer for use in industry
0632 3340Can measure CO, COlow, NO, NOlow, NO2 or SO2
Extended measuring range for use in environments with high gas concentrations
Precalibrated gas sensors for quick and easy sensor change
Integrated pressure difference and air flow measurements for mass flow calculations
Emission control in industry: the testo 340 flue gas analyzer gives you professional technology, easy handling and practical execution in one instrument. The high-performance testo 340 flue gas analyzer is fitted with an O2 sensor and can be equipped with up to 3 additional sensors.
testo 340 flue gas analyzer, calibration protocol, shoulder strap, O2 sensor and integrated flow and pressure difference measurements.
PLEASE NOTE: Your testo 340 must be fitted with a second gas sensor for it to work. Up to three additional sensors can be fitted.
Differential Pressure - Piezoresistive
| Measuring range | -200 to 200 hPa |
|---|---|
| Accuracy | ±1.5 % of mv (Remaining Range) ±0.5 hPa (-49.9 to 49.9 hPa) |
| Resolution | 0.1 hPa |
Absolute Pressure
| Measuring range | +600 to +1150 hPa |
|---|---|
| Accuracy | ±10 hPa |
| Resolution | 1 hPa |
Flue gas O₂
| Measuring range | 0 to 25 Vol.% |
|---|---|
| Accuracy | ±0.2 Vol.% |
| Resolution | 0.01 Vol.% |
| Reaction time t₉₀ | < 20 s |
Flue gas probes
Pitot tubes
Temperature probes
Accessories
Certificates
Analysis of the gas atmosphere (thermal processes)
Flue gas analysis is used for thermal manufacturing processes, from ongoing emission control, via setting and optimisation of combustion systems, through to process monitoring. Flue gas analysis instruments serve to optimise operations and save fuel. At the same time, flue gas measurement enables checking and monitoring of flue gas emission limit values laid down by the authorities, along with functional testing of permanently installed emission instruments. Flue gas analysis instruments are increasingly used for monitoring process and product quality.
Advantages of the testo 340
Ideal for measurements at high concentrations
- When recording extremely high concentrations, the measuring range extension is automatically activated. This enables continuation of the measurement. The gas sensor is not subjected to any higher stress than it is at low gas concentrations. This ensures the sensor has the longest possible service life.
Service measurement on industrial engines
Flue gas analysis instruments are one of the items of equipment that are used on a daily basis by service engineers to achieve optimum tuning of engines. Flue gas measurement is used on industrial engines when they are commissioned, at regular maintenance intervals or for troubleshooting when they are running in an unstable way. The background to flue gas measurement is tuning the engine to the optimum operating parameters while complying with the limit value regulations in force. Maintenance work that is carried out regularly makes an important contribution to avoiding downtimes over the long term, to ensuring the quality of the system and thus a high level of efficiency and to having a significant influence on emission levels.
Advantages of the testo 340
Separate NO and NO2 measurement
- The real NOx value is measured with the NO and NO2 sensor combination. In gas engines, the NO2 component of the NOx value can fluctuate greatly, so the separate measurement of each of the gases is necessary for correct NOx values.
Measurements even at high CO concentrations
- At unexpectedly high concentrations (up to 50,000 ppm), the automatic dilution of the sensor with fresh air allows measurements even when the engine conditions are not defined, without negatively affecting the service life of the sensor.
Special flue gas probes for industrial engines as an accessory
- These probes are highly heat-resistant and specially designed to compensate for different pressure conditions, e. g. for measurements before and after the catalytic converter.
Engine-specific parameters
- The most important parameters for industrial engines such as O2, CO, NO, NO2, NOx and Lambda can be displayed simultaneously.
Service measurement on industrial burners
The testo 340 flue gas analysis instrument offers service engineers a vast range of technical functions. In addition to compliance with environmental regulations, it can also be used to check correct functioning and to optimise burner efficiency. Flue gas measurement is used on industrial burners for safe and efficient commissioning, at regular maintenance intervals or for troubleshooting when they are running in an unstable way.
Advantages of the testo 340
Time saving through helpful instrument pre-settings
- Typical fuels, a sensible sequence of flue gas parameters in the display and useful instrument settings are preset for each application. Tips on the display take the user through the measurement (no prior knowledge specific to the instrument needed). The testo 340 is ready for operation within just a few minutes.
Unrestricted measuring at high concentrations
- When commissioning burners or carrying out measurements on unfamiliar systems, very high concentrations can occur unexpectedly. The measuring range extension is automatically activated in such cases.
Always ready for use – even in tough day-to-day work
- The robust housing protects the measuring instrument from knocks.
- Datasheet testo 340(pdf, 407.83 kB)
- EU declaration of conformity testo 340(pdf, 35.19 kB)
- Instruction manual testo 340(pdf, 1.25 MB)
- Approval and Certification testo 340(pdf, 141.84 kB)
- Instruction manual easyEmission(pdf, 2.36 MB)
- testo 340 Firmware update(V1.21, 3.61 MB)
- testo usb driver - for various measuring instruments(v2.9.1, 2.02 MB)USB driver for the following devices with USB port: * USB Interface testo 174 / 177 - T + H * testo 300 / 320 / 330 / 330i / 335 / 340 / 350 * testo 435 * testo 556 / 560 / 570 / 580 * testo 635 * testo 735 * testo 845