- Home
- Set with flue gas analyzer testo 320 (with H2-compensated C...
Set with flue gas analyzer testo 320 (with H2-compensated C...
Product no. 0563 3220 77Set with flue gas analyzer testo 320 (with H2-compensated C...
Product no. 0563 3220 77Your advantages
Set with flue gas analyzer testo 320 (with H2-compensated CO measurement cell and Bluetooth), modular 300 mm flue gas probe, combustion air probe and mains unit
Technical data
General technical data
| Weight | 573 g |
|---|---|
| Dimensions | 240 x 85 x 65 mm |
| Operating temperature | -5 to +45 °C |
| Display size | 240 x 320 pixels |
| Display function | Colour graphic display |
| Power supply | Battery: 3.7 V / 2,400 mAh; Mains unit: 6 V / 1.2 A |
| Maximum memory | 500 Measurement values |
| Storage temperature | -20 to +50 °C |
Differential Pressure - Piezoresistive
| Measuring range | ±10000 Pa |
|---|---|
| Accuracy | ±3 % of mv (10 to 10000 Pa) plus ±1 Digit ±0.3 Pa (0 to 9.99 Pa) plus ±1 Digit |
Flue gas O₂
| Measuring range | 0 to 21 Vol.% |
|---|---|
| Accuracy | ±0.2 Vol.% |
| Resolution | 0.1 Vol.% |
| Reaction time t₉₀ | < 20 s |
Sensor
Accessories for probes
Accessories for probes
Hose connection set for separate gas pressure measurement testo 300, testo 330 LL and testo 320
Product no.:
0554 1203
0554 1203
Accessories for probes
Differential temperature set consisting of 2 Velcro probes and temperature adaper testo 327
Product no.:
0554 1208
0554 1208
Accessories for probes
Compact basic flue gas probe with 180 mm long probe shaft with thermocouple up to 500 °C and dirt filter
Product no.:
0600 9740
0600 9740
Combustion air / temperature
Combustion air / temperature
Combustion air temperature probe, immersion depth 300 mm
Product no.:
0600 9791
0600 9791
Combustion air / temperature
Combustion air temperature probe, immersion depth 60 mm
Product no.:
0600 9797
0600 9797
Combustion air / temperature
Combustion air temperature probe with an immersion depth of 190 mm – measuring range: 0 to +100 °C
Product no.:
0600 9787
0600 9787
Probes
Probes
Our flexible probe shaft helps you to carry out flue gas measurements even on difficult-to-access measurement apertures. Since the probe shaft is made of very flexible plastic, you can easily bend it, allowing it to be inserted into exhaust flues which are obstructed (e.g. by sloping ceilings).
Product no.:
0554 9770
0554 9770
Probes
TÜV-tested modular flue gas probe with 300 mm long probe shaft, cone, integrated thermocouple up to 500 °C and quick-change click system
Product no.:
0600 9761
0600 9761
Probes
Modular flue gas probe with 300 mm long probe shaft, cone, integrated thermocouple up to 500°C and quick-change click system
Product no.:
0600 9763
0600 9763
Temperature probes
Temperature probes
Connection cable
Product no.:
0430 0143
0430 0143
Temperature probes
Mini ambient air probe for flue gas analyzers – measuring range: 0 to +80 °C
Product no.:
0600 3692
0600 3692
Accessories
Accessories for measuring instrument
Accessories for measuring instrument
Instrument case (height: 130 mm) - for instrument, probes and accessories
Product no.:
0516 3300
0516 3300
Accessories for measuring instrument
Spare particle filter, compact probe; 10 off
Product no.:
0554 0040
0554 0040
Accessories for measuring instrument
Smoke tester with oil and soot sheet, for measuring soot in flue gas, excl. cone (part no. 0554 9010)
Product no.:
0554 0307
0554 0307
Downloads
Operating instructions
- Instruction manual testo 320(pdf, 2.56 MB)
Software
- Instruction manual EasyHeat software(pdf, 3.55 MB)
- Download testo 320 firmware(V1.12, 12.77 MB)If the firmware update does not start under Windows 8.1 or Windows 10, a new bootloader must be installed on the measuring device once.
A description and all necessary files can be found under the search term: Update-Kit / Bootloader - Testo ZIV driver ZIV 2000 for testo 320 and testo 330(v2.1, 2.22 MB)Testo ZIV driver in the 2000 version. The Testo ZIV driver is used to connect the testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface Version 2.0 defined by the Zentralverband des Schornsteinfegerhandwerks (Central Association of Chimney Sweeps, ZIV). Please check with the manufacturer of your application program as to whether this interface is supported. If Microsoft .NET Framework 4.0 has not been installed on the computer, it must be downloaded from the Microsoft website and installed on the system.
- Testo ZIV driver for testo 300, testo 320 and testo 330(v2.3, 64.11 MB)The Testo ZIV driver is used to connect the testo 300, testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface defined by the Zentralverband des Schornsteinfegerhandwerks (ZIV, Central Association of Chimney Sweeps) in version 1.0 of 01. August 2012, in version 2.0 of 13. February 2017 as well as version 3.0 from 02. July 2021. Please check with the manufacturer of your application program as to whether this interface is supported.
- testo 320 Bootloader(v1.18, 384.0 kB)
- Manual firmware testo 320(pdf, 47.3 kB)
- Update-Kit / Bootloader(V1.22, 1.24 MB)(testo 330 LL | testo 330i | testo 350 Control Unit + Analysis Box | testo 320)
If the firmware update does not start under Windows 8.1 or Windows 10, a new bootloader must be installed on the measuring device once.
