- Home
- testo 300 kit 2
testo 300 kit 2 - flue gas analyzer (O2, CO H2-compensated up to 8,000 ppm)
0564 3002 72testo 300 kit 2 - flue gas analyzer (O2, CO H2-compensated up to 8,000 ppm)
0564 3002 72Efficient, wireless parallel measurement of up to four testo Smart Probes simultaneously
In the kit: testo 300 NEXT LEVEL flue gas analyzer, including O2 and CO H2-compensated sensor up to 8,000 ppm, mains unit, basic flue gas probe, testo Bluetooth® Connector, spare dirt filters, EasyHeat software, instrument bag
With this kit, you will be equipped for the most important measurements involving heating systems: the TÜV-tested testo 300 flue gas analyzer is supplied with O2 and CO H2-compensated sensor up to 8,000 ppm, basic flue gas probe, instrument bag and practical accessories.
- testo 300 flue gas analyzer with O2 and CO H2-compensated sensor up to 8,000 ppm (0633 3002 71)
- USB mains unit, including cable (0554 1106)
- Compact basic flue gas probe, 180 mm; Ø 6 mm; Tmax. 500°C; 1.5 m hose; including dirt filters and cone for fixing (0600 9740)
- Spare dirt filters, compact probe; 10 off (0554 0040)
- Free download EasyHeat PC software (0554 3332)
- Instrument bag (0516 3001)
Temperature - TC Type K (NiCr-Ni)
| Measuring range | -40 to +1200 °C |
|---|---|
| Accuracy | ±0.5 % of mv (Remaining Range) ±0.5 °C (0.0 to +100.0 °C) |
| Resolution | 1 °C (Remaining Range) 0.1 °C (-40 to +999.9 °C) |
Differential Pressure - Piezoresistive
| Measuring range | -100 to +200 hPa |
|---|---|
| Accuracy | ±1 % of mv (+50.1 to +100.0 hPa) ±0.5 hPa (0 to +50.0 hPa) ±1.5 % of mv (+100.1 to +200 hPa) |
| Resolution | 0.01 hPa |
Flue gas O₂
| Measuring range | 0 to 21 Vol.% |
|---|---|
| Accuracy | ±0.2 Vol.% |
| Resolution | 0.1 Vol.% |
Flue gas CO (with H₂-compensation)
| Measuring range | 0 to 8000 ppm |
|---|---|
| Accuracy | ±10 ppm or ±10 % of mv (0 to 200 ppm) ±10 % of mv (2001 to 8000 ppm) ±20 ppm or ±5 % of mv (201 to 2000 ppm) |
| Resolution | 1 ppm |
Differential Pressure flue gas Draught - Piezoresistive
| Measuring range | -9.99 to +40 hPa |
|---|---|
| Accuracy | ±0.02 hPa (0.1 to +3.00 hPa) ±1.5 % of mv (+3.01 to +40 hPa) ±0.005 hPa (0 to 0.1 hPa) |
| Resolution | 0.001 hPa (0 to 0.1 hPa) 0.01 hPa (Remaining Range) |
Flue gas degree of effectivity, Eta (calculated)
| Measuring range | 0 to 120 % |
|---|---|
| Resolution | 0.1 % |
Flue gas loss (calculated)
| Measuring range | 0 to 99.9 % |
|---|---|
| Resolution | 0.1 % |
Flue gas CO₂ calculation (calculated from O₂)
| Measuring range | Display range 0 to CO₂ max |
|---|---|
| Accuracy | ±0.2 Vol.% |
| Resolution | 0.1 Vol.% |
Ambient CO
| Measuring range | 0 to 2000 ppm |
|---|---|
| Accuracy | ±10 % of mv (101 to 2000 ppm) ±10 ppm (0 to 100 ppm) |
| Resolution | 1 ppm |
General technical data
| Operating humidity | 15 to 90 %RH non-condensing |
|---|---|
| Weight | approximately 800 g |
| Dimensions | 244 (including probe connection) x 98 x 59 mm (LxWxH) |
| Operating temperature | -5 to +45 °C |
| Protection class | IP40 |
| Product colour | black/orange |
| Display type | 5.0" touch display, HD 1280*720 pixels, IPS (160 k) |
| Power supply | Rechargeable battery, USB mains unit |
| Warranty conditions | https://www.testo.com/guarantee |
| Authorizations | TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3 |
| Guarantee | Gas sensors (O₂, CO) 24 months; Thermocouple 12 months; rechargeable battery: 12 months |
| Memory | 1,000,000 measuring values |
| Battery life | 10 h |
| Storage battery type | Lithium ion battery |
| Storage temperature | -20 to +50 °C |
| Charging temperature | 0 to +45 °C |
- Testo ZIV driver for testo 300, testo 320 and testo 330(v2.3, 64.11 MB)The Testo ZIV driver is used to connect the testo 300, testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface defined by the Zentralverband des Schornsteinfegerhandwerks (ZIV, Central Association of Chimney Sweeps) in version 1.0 of 01. August 2012, in version 2.0 of 13. February 2017 as well as version 3.0 from 02. July 2021. Please check with the manufacturer of your application program as to whether this interface is supported.
- Firmware / App testo 300(v1.10.8125, BTG 0.3.8, App 12.7.22.17649, 43.94 MB)