Emission measuring device
Environmental pollution due to emissions is no secret. It is actually the case that more and more problems have been occurring over recent years due to the increase in pollution. There are guidelines here for those responsible for keeping emissions in their area of responsibility under control. However, to do this you have to have an emission measuring device to hand.
Thanks to its modern technical features, the special flue gas analyser is capable of recording even small amounts of pollution and provide detailed values. The instruments are a practical aid, particularly in the industrial sector. They are very easy to operate and they offer very accurate measurements of values, which you can then analyse.
Tips for buying emission measuring technology
fields of application – there are special instruments for these
recording of data areas, for example CO or SO₂
measurement readiness of the instrument
integrated sensors
Instruments for emission measurement
Industrial flue gas analysis
This comprehensive reference guide offers you practical tips and tricks relating to emissions measurements.
The combustion process
Practical knowledge for work in the field
Gas analysis technology
Industrial gas analysis applications
Testo gas analysis technology
And much more ...
Further information about flue gas analysis and emission measurement
Application videos testo 340/350
Reduce emissions. Increase efficiency. The Testo flue gas analyzers.
Learn more
Video instructions: Changing the testo 340 / testo 350 sensor
Handy. Fast. Simple.
Learn more
Video-Trainings: testo 350
Video trainings for Testo's measuring instruments. Learn how to use and operate the Testo measuring instruments in our How-to-Videos.
Learn more
Video-Trainings: testo 340
Video trainings for Testo's measuring instruments. Learn how to use and operate the Testo measuring instruments in our How-to-Videos.
Learn more
White paper cross-sensitivity compensation
Cross-sensitivity compensation in electrochemical gas sensors.
Learn more
White paper – Influencing factors and measurement parameters for burner and boiler systems
All about flue gas analysis and system trimming.
Learn more
Emission measurement – why it is so important
Systems in the industrial sector have to meet important requirements for the company. One of these requirements is efficiency. Systems which operate at a high level of efficiency save the operating company both money and time. It is therefore advisable to monitor work. That enables you to identify where it is still possible to make efficiency improvements. This is where emissions detectors are a practical aid. They can help users to maintain control over the efficiency of the system.
Technical systems and their use are associated with a discharge of emissions. These have a number of disadvantages straight away. Air pollution in particular is an important issue here. Those responsible have the task of preventing air pollution, or keeping it as low as possible. There are also legal regulations and directives for this purpose which must be followed. These include emission limit values. If these are exceeded, it not only leads to increased environmental pollution, but can also be harmful to employees' health.
Emission monitoring must be carried out precisely. This means that the results you get here from the measuring devices should be representative. Moreover, it is helpful if these results are directly compared with each other. It must be possible to measure limit values with the exhaust gas measuring device. You do not have the option of letting everyone do the measurement. Instead, you need qualified personnel to carry out the measurements.
The emission measuring device enables different measuring objects to be dealt with. These include sounds and vibrations, but also odours and air pollutants.
Most measurements that are carried out relate to air pollutants. These measurements should also involve identifying the pollutants which are to be found in the air. The instrument normally uses an indication of the concentration here. The type of options which are available naturally depends on the design of the instrument.
Emissions monitoring
Particulate matter monitoring is of course an important factor in terms of health and environmental protection. However, the general checking of flue gas values in specific areas must not be underestimated either. The combination of several instruments may prove to be very expedient here. Technology has now progressed so far that you have the possibility of combining different instruments and then comparing the values with one another. Thus, for example with oil heating systems in particular, it makes sense to use a smoke tester too.
The emission analyzer is also used to obtain general values. The combined results of the instruments mean you benefit from a very detailed assessment that can be relied on.
Further instruments for emission monitoring
Emissions detectors with excellent technical equipment
Emission control in industry must therefore be very detailed and also traceable. This is in your own interest and also that of your employees and customers. Particularly where people work in the industrial sector, it is especially important for you to keep pollution as low as possible. Emission monitoring should therefore be carried out with a very precise technical instrument.
Consider the appropriate Testo flue gas analyser. The technical features of the instruments are outstanding. You have the advantage of being able to undertake different measurements with one instrument.
So, you can carry out measurements of NO2, CO, COlow, NO, NOlow or SO2.
Whether it is nanoparticles measuring instruments or flue gas analysers – there are a variety of options for keeping an eye on emissions in industry and for responding when limit values are exceeded. At Testo, we provide you with these aids in the form of technical instruments. You benefit from a large selection of different solutions which you can rely on. It is also possible here to combine the individual instruments with one another. Depending on the model, you can also transmit the data in your internal network via WiFi.
Emission technology – using results for leak detection
The emission technology that can be used with today's instruments has many advantages. In addition to identifying the current values in relation to flue gas emissions, it also plays a role in reducing emissions. In this context, a leak detector may come into play.
This can be used in a variety of areas. For example, if an emission measuring device establishes that the discharge of flue gases has risen too high, there may be different reasons for this. One possibility is that the origin is a leak. Identifying leaks precisely when they are particularly small is the task of a leak detector, and you can benefit from this too.
Very high sensitivity
Easy operation
Detection of even small leaks in affected instruments
One App for all applications
The testo Smart App guides you quickly and easily through measurements on refrigeration, air conditioning and heating systems.
New feature:
Professional measuring programs for increasing the efficiency of your applications
Multifunctional
Compatible with all Bluetooth-enabled Testo measuring instruments
Efficient
Direct report dispatch by e-mail
Fast
All measurement values at a glance
Easy
Intuitive measurement menus
Clever
Free download, free use
NEW
Professional measuring programs
