- Home
- SO2 low kit heated
SO2 low kit heated
Product no. 0563 2251
SO2 low kit heated
Product no. 0563 2251Your advantages
High degree of measuring accuracy
Less contamination and deposition of dust particles
For long-term measurements in the >1 day range
Measurements in applications involving flue gas temperatures of up to +600°C
The kit with SO2 low sensor and heated gas sampling system was developed for the precise measurement of very low SO2 values following flue gas after-treatments (e.g. scrubbers). SO2 measurement enables you to ensure the legally compliant operation of coal-fired power plants, waste incineration plants and large engines. Particularly convenient: the efficiency of the reduction of SO2 concentrations is calculated directly in the testo 350 flue gas analyzer (please order separately).
Description
Delivery Scope
- Industrial probe kit heated (0600 7630): heated probe shaft, including temperature measurement up to +600°C flue gas temperature (thermocouple type K temperature sensor), heated gas sampling hose (length 4 m)
- SO2 low retrofit sensor (0554 2251)
Please note:
For a measurement, the heated SO2 low kit must be combined with the testo 350 flue gas analyzer (Control Unit 0632 3511 and analyzer unit 0632 3510) and Peltier gas preparation with peristaltic pump for automatic condensate drainage.Details on kit components
Details on kit components
Industrial probe kit heated
Product no.: 0600 7630
Details on kit components
SO2 low retrofit sensor
Product no.: 0554 2251
Related Products
testo 340 - Flue gas analyzer for use in industry
Product no.:
0632 3340
0632 3340
SAR 5 148
testo 350 - Analysis Box for exhaust gas analysis systems
Product no.:
0632 3510
0632 3510
SAR 6 678
Technical data
General technical data
| Weight | 4310 g |
|---|---|
| Length probe shaft | 1,110 mm |
| Product-/housing material | Metal housing |
| Cable length | 2.6 m |
| Diameter probe shaft | 25 mm |
| Temperature maximum | 600 °C |
| Product colour | Black; silver |
General technical data
| Weight | 18 g |
|---|---|
| Dimensions | 40 x 30 x 30 mm (LxWxH) |
| Product-/housing material | Plastic |
| Product colour | green; grey |
| Measuring range | 0 to 200 ppm |
|---|---|
| Resolution | 0.1 ppm |
Accessories
Accessories
Accessories
Thermocouple type K (length 2.2 m)
Product no.:
0600 7615
0600 7615
SAR 1 554
Accessories
Industrial probe pre-filter for dust-laden flue gas
Product no.:
0600 7616
0600 7616
SAR 1 737
Accessories
Extension tube - Tmax +1200°CLength 1 m, Ø 12 mm
Product no.:
0600 7617
0600 7617
SAR 2 792
Applications
Official emissions measurement (compliance testing)
In most countries, operation of all types of industrial plants (e.g. large power stations, steelworks. cement works, glass works, and chemical plants), and local authority facilities, right through to small production sites is subject to strict regulations governing exhaust gas emissions into the atmosphere. Suitable measures are be taken to ensure and regularly verify that the components defined as pollutants do not exceed certain limit values in the flue gas.
The flue gas analyzer testo 350 can be used to carry out a preliminary analysis before an official emissions reading, or, depending on the country and directive, the actual official compliance testing.
Downloads
Operating instructions
- Instruction manual testo testo SO2low Sensor(pdf, 996.08 kB)
