1. Home
    2. testo 330-2 LL

    testo 330-2 LL - Pro flue gas analysis kit

    0632 3307
    SAR 6 376
  1. High-quality, longlife (up to six years) O2 and CO sensors; further sensors (i.e. NO sensor) optional
  2. 4-year warranty on the flue gas analyzer
  3. No need to withdraw the sensor from the flue to zero
  4. CO measurements up to 30 000 ppm
    5. The intelligent professional analysis tool for all measurements in and around heating systems. The TÜV-tested testo 330-2 LL flue gas analyzer comes with a wide range of user-changeable, longlife sensors that last for up to six years. Saves you from having to buy an extra measuring device – and new sensors.

    The TÜV-tested  testo 330-2 LL flue gas analyzer ensures that you have the proper tools for proper measurements for a proper long time! The easy-to-use, state-of-the-art analysis tool provides you with quick and reliable readings and is built to last for years to come.

    • 4-year warranty on the flue gas analyzer
    • Bigger savings with longlife (LL) sensors. Because the O2 and CO sensors need to be replaced less often (typically once every six years and therefore once less) you save on costs.
    • Wide range of optional sensors (i.e. NO, COlow, NOlow sensors) that allow you to customize your analysis tool to suit your individual requirements and saves you from having to buy other flue gas meters or analysis tools
    • Sensor connector for quick `n easy sensor change. All gas circuits can be connected to the analysis tool via a bayonet lock


    The testo 330-2 LL pro flue gas analyzer – one tool for a host of measurements

    The testo 330-2 LL pro flued gas analyzer is designed to allow you to carry out all standard installation, service and maintenance measurements in and around heating systems with only one device.

    • Flue gas parameter (CO, O2, temperature) measurements at burners
    • Draft measurements at heating systems
    • Pressure measurements at burners (i.e. die pressure, gas flow pressure)
    • CO ambient air measurements with optional sensor
    • Gas leak detection and gas pipe inspections with optional sensors
    • Pressure difference measurements


    testo 330-2 LL flue gas analyzer – it’s what’s on the inside that counts

    • High-quality, longlife O2, CO and NO – O2- and CO sensors included
    • Sensor connector for quick `n easy sensor change
    • High-resolution graphic color display, graphic presentation of the course of the measurement with flue gas matrix and line diagram
    • Wide range of measurement menus for heating systems analysis checks
    • Integrated sensor monitoring; traffic light color coding system and at-a-glance status
    • User-changeable sensors; easy-to-replace sensor filter
    • No need to withdraw the sensor from the flue to zero (additional feature which the testo 330-1 LL does not have)
    • CO thinning: automatic thinning from 8 000 ppm to at least 30 000 ppm during CO measurements (another additional feature which the testo 330-1 LL does not have)
    • Logger function for long-term measurements; supersize memory for up to 500 000 readings
    • Integrated magnets that stick to almost all metal objects for easy measuring
    • Easy-to-empty condensate collection tank
    • Optional Bluetooth interface for optional testo BLUETOOTH® printer
    • 4-year warranty without service contract
    • TÜV-tested according to 1st BImSchV EN 50379, Parts 1-3

    Please Note: If you think that the testo 330-2 LL is just the analysis tool and measuring device you’ve been looking for, but you also need an H2-compensated CO sensor, then you will be pleased to hear that this sensor – and many other optional accessories including a Bluetooth interface – can be ordered together with your flue gas analyzer.


    What’s included

    testo 330-2 LL flue gas analyzer, O2/CO sensor, rechargeable battery, calibration certificate.

     

    General technical data

    Weight
    600 g (without rechargeable battery)
    Dimensions
    270 x 90 x 65 mm
    Operating temperature
    -5 to +45 °C
    Display size
    240 x 320 pixels
    Display function
    Colour graphic display
    Power supply
    Rechargeable battery pack 3.7 V / 2.6 Ah; Mains unit 6 V / 1.2 A
    Maximum memory
    500,000 readings
    Storage temperature
    -20 to +50 °C

    Differential Pressure - Piezoresistive

    Measuring range
    ±10000 Pa
    Accuracy
    ±3 % of mv (10 to 10000 Pa) plus ±1 Digit
    ±0.3 Pa (0 to 9.99 Pa) plus ±1 Digit

    Flue gas O₂

    Measuring range
    0 to 21 Vol.%
    Accuracy
    ±0.2 Vol.%
    Resolution
    0.1 Vol.%
    Reaction time t₉₀
    < 20 s

    Accessories for probes

  5. Accessories for probes
    Hose extension
    Hose extension - probe-instrument extension hose (length 2.8 m)
      :
      0554 1202
      SAR 911
    • Accessories for probes
      Probe stop 6 mm; steel; with spring clamp and handle; Tmax. 500 °C
        :
        0554 3329
      • Accessories for probes
        Probe stop 8 mm; steel; with spring clamp and handle; Tmax. 500 °C
          :
          0554 3330
          SAR 99
        • Accessories for probes
          Probe shaft multi-hole; length 300 mm; Ø 8 mm; for mean CO calculation
            :
            0554 5762
            SAR 856
          • Accessories for probes
            Probe shaft, length 335 mm, incl. cone
            Probe shaft - length 335 mm, Ø 8 mm, Tmax. 1000°C
              :
              0554 8764
              SAR 1 440
            • Accessories for probes
              Probe shaft, length 700 mm, incl. cone
              Probe shaft - length 700 mm, Ø 8 mm, Tmax. 1000°C
                :
                0554 8765
                SAR 2 000
              • Accessories for probes
                Probe shaft; length 180 mm; 8 mm; Tmax. 500 °C
                  :
                  0554 9760
                  SAR 604
                • Accessories for probes
                  Probe shaft; length 300 mm; Ø 8 mm; Tmax. 500 °C
                    :
                    0554 9761
                    SAR 634

                    • Cases

                  • Cases
                    Tools system case testo 330-1/-2 LL with tools section; without contents
                      :
                      0516 0329

                      • Instruments / options

                    • Instruments / options
                      0600-9765-flue-gas-probe
                      Solid fuel kit - including probe shaft and adapter
                        :
                        0600 9765
                        SAR 2 062
                      • Instruments / options
                        Fine pressure probe for heating system checks and 4 pascal measurement (with appropriate flue gas analyzer and accessories)
                          :
                          0638 0330
                          SAR 1 431

                          • Measurement cells

                        • Measurement cells
                          O2-Sensor
                          O2 sensor for testo 330-1 LL/-2 LL
                            :
                            0393 0002
                          • Measurement cells
                            Upgrade NO-sensor; 0 to 3000 ppm; resolution 1 ppm
                              :
                              0554 2151
                              SAR 3 208

                              • Ambient CO measurement in the heated environment

                              Carbon monoxide (CO) is a colourless, odourless and taste-free gas, but also poisonous. It is produced during the incomplete combustion of substances containing carbon (oil, gas, and solid fuels, etc.). If CO manages to get into the bloodstream through the lungs, it combines with haemoglobin thus preventing oxygen from being transported in the blood; this in turn will result in death through suffocation. This is why it is necessary to regularly check CO emissions at the combustion points of heating systems and the surroundings.

                              testo 330-1/-2 LL

                              Measuring pressure on burners (nozzle pressure, gas flow pressure, etc.)

                              Standard readings taken during services of domestic heating systems include checking the gas pressure on the burners. This involves measuring the gas flow pressure and gas resting pressure. The flow pressure, also called supplied pressure, refers to the gas pressure of the flowing gas and resting pressure of the static gas. If the flow pressure for gas boilers is slightly outside the 18 to 25 mbar range, adjustments must not be made and the boiler must not be put into operation. If put into operation nonetheless, the burner will not be able to function properly, and explosions will occur when setting the flame and ultimately malfunctions; the burner will therefore fail and the heating system will shut down.

                              Measuring the flue gas parameters of the burner (CO, O2, and temperature, etc.)

                              The flue gas measurement for a heating system helps to establish the pollutants released with the flue gas (e.g. carbon monoxide CO or carbon dioxide CO2) and the heating energy lost with the warm flue gas. In some countries, flue gas measurement is a legal requirement. It primarily has two objectives:

                              1. Ensuring the atmosphere is contaminated as little as possible by pollutants; and
                              2. energy is used as efficiently as possible.

                              Stipulated pollutant quantities per flue gas volume and energy losses must never be exceeded.

                              Measurement in terms of results required by law takes place during standard operation (every performance primarily using the appliance). Using a Lambda probe (single hole or multi-hole probe), the measurement is taken at the centre of flow in the connecting pipe (in the centre of the pipe cross-section, not at the edge) between the boiler and chimney/flue. The measured values are recorded by the flue gas analyzer and can be logged either for print out or transfer to a PC at a later stage.

                              Measurement is taken by the installer at commissioning, and if necessary four weeks later by the flue gas inspector/chimney sweep, and then at regular intervals by the authorised service engineer.

                              testo 330-1/-2 LL

                              Measuring temperatures on radiators

                              When measuring temperatures on radiators, the flow and return temperature are recorded in particular and assessed by the tradesman. The flow temperature is defined as the temperature of the thermal transfer medium (e.g. water) that the system is supplied with. The temperature of the medium flowing out of the system is accordingly called the return temperature. To prevent losses within the heat distribution system and achieve a better level of efficiency spot recording of flow and return temperatures are necessary. Implementation of relevant measures ultimately leads to hydraulic adjustment on the basis of knowledge about the flow and return temperatures. This defines a procedure with which every radiator or heating circuit of a flat radiator within a heating system is supplied at a set flow temperature with the precise amount of heat needed to achieve the ambient temperature required for the individual rooms. Flawed operating conditions will result in considerable excess consumption of electricity and heating energy. The German Energy Saving Regulation (EnEV) therefore requires hydraulic adjustment for systems being set up or overhauled for this very reason.

                              • Instruction manual EasyHeat software(pdf, 3.55 MB)
                              • Testo ZIV driver ZIV 2000 for testo 320 and testo 330(v2.1, 2.22 MB)
                                Testo ZIV driver in the 2000 version. The Testo ZIV driver is used to connect the testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface Version 2.0 defined by the Zentralverband des Schornsteinfegerhandwerks (Central Association of Chimney Sweeps, ZIV). Please check with the manufacturer of your application program as to whether this interface is supported. If Microsoft .NET Framework 4.0 has not been installed on the computer, it must be downloaded from the Microsoft website and installed on the system.
                              • testo usb driver - for various measuring instruments(v2.9.1, 2.02 MB)
                                USB driver for the following devices with USB port: * USB Interface testo 174 / 177 - T + H * testo 300 / 320 / 330 / 330i / 335 / 340 / 350 * testo 435 * testo 556 / 560 / 570 / 580 * testo 635 * testo 735 * testo 845
                              • Testo ZIV driver for testo 300, testo 320 and testo 330(v2.3, 64.11 MB)
                                The Testo ZIV driver is used to connect the testo 300, testo 320 and testo 330 measuring instruments to an application program (sweeping district administration program) according to the interface defined by the Zentralverband des Schornsteinfegerhandwerks (ZIV, Central Association of Chimney Sweeps) in version 1.0 of 01. August 2012, in version 2.0 of 13. February 2017 as well as version 3.0 from 02. July 2021. Please check with the manufacturer of your application program as to whether this interface is supported.
                              • Firmware (testo 330-1 LL v2010, 330-2 LL v2010, 330-1 LX, 330-2 LX, 380)(V2.27, 13.63 MB)
                                If the firmware update does not start under Windows 8.1 or Windows 10, a new bootloader must be installed on the measuring device once.
                                A description and all necessary files can be found under the search term: Update-Kit / Bootloader
                              • USB FlashUpdate testo 330 v2006 Shortdiscription(pdf, 217.61 kB)
                                This software supports you in updating the software of your testo 330. Please read the instruction manual (german / english) for more information.
                              • Manual Firmware-Update testo 330-2 LL v2010(pdf, 242.16 kB)
                                Manual Firmware-Update testo 330-2 LL v2010
                              • Update-Kit / Bootloader(V1.22, 1.24 MB)
                                (testo 330 LL | testo 330i | testo 350 Control Unit + Analysis Box | testo 320)
                                If the firmware update does not start under Windows 8.1 or Windows 10, a new bootloader must be installed on the measuring device once.