1. Home
    2. Test system set

    Test system set - Complete testing system set with case

    0563 0314
    consisting of testo 312-3 pressure gauge, TopSafe for testo 312, printer, testo 316-1 gas leak detector, TopSafe for testo 316-1, pressure drop test set 200mbar, test pump, single-pipe counter cap, two-valve branch, single-valve stop, LW 6 connection hose, conical test plugs 1/2", 3/4", high pressure stage plugs 3/8", 3/4", 1/2", 1", leak detection spray, slide rule, system case
    Quick and efficient. You can test the stability and pressure drop in gas and water pipes quickly, conveniently and efficiently using the electronic testo 312 pressure gauge. The results are printed out on the Testo printer.

    General technical data

    Dimensions
    8 x 3 x 2 in. / 215 x 68 x 47 mm
    Operating temperature
    41° to 113 {٪S2} / 5 {#0} to +45 {٪S2}
    Housing
    ABS
    Miscellaneous
    Measurement range can be switched from ±40 hPa to ±200 hPa Adjustment step: 0.01 hPa or 5 hPa
    Alarmsignal
    audible; rpm - Optical
    Alarm untere Grenze
    -0.04 hPa
    Alarm upper threshold
    100 hPa
    Battery type
    9V block battery
    Display type
    LCD
    Display size
    2 lines
    Storage temperature
    -4° to 140 {٪S2} / -20 to +60 {٪S2}
    Weight
    11 oz. / 300 g

    Pressure measurement

    Measuring range
    1200° to 1200 InH₂O / 3000 to +3000 hPa
    -120° to 120 InH₂O / -300 to +300 hPa
    Accuracy
    ±2 % of mv (+160 to +2000 ) / ±2 % of mv (+400 to +2000 )
    ±0.2 InH₂O (0 to +20 InH₂O) / ±0.5 hPa (0 to +50 hPa)
    ±1.5 % of mv >20 InH₂O / ±1.5 % of mv >50 hPa
    ±2 InH₂O (0 to +160 InH₂O) / ±4 hPa (0 to +400 hPa)
    ±4 % of mv (+800 to +6000 ) / ±4 % of mv (+2000 to +6000 )
    Resolution
    0 InH₂O (-300 to +120 InH₂O) / 0 hPa (-300 to +300 hPa)
    1 InH₂O (-6000 to +2400 InH₂O) / 1 hPa (-6000 to +6000 hPa)
    Overload rel. (low pressure)
    8000
    Overload rel. (high pressure)
    3200 InH₂O / 8000 hPa