1. Home
    2. testo gas detector

    testo gas detector - Gas detector

    0632 0323
  1. Gas detector for methane, propane and hydrogen gases
  2. Flexible probe extension for inaccessible areas
  3. Acoustic signals on approaching the lower explosive limit
  4. With alarm function: continuous tone and indication on the display on reaching the explosive limit
  5. testo gas detector incl. flexible probe extenstion, rechargeable battery and mains unit for mains operation and battery recharging, with calibration protocol
    According to DVGW leaflet G 465-4, gas detectors are approved for above-ground gas detection up to the "lower explosive limit (LEL)". Testo's gas detector is a multi-range gas detector for the gas types methane, propane and hydrogen. Gas concentrations are measured by the semi-conductor sensor in the ppm range and are shown in the display with a resolution of 1 ppm.

    testo gas detector, including flexible probe extension, rechargeable battery and mains unit for mains operation and charging the battery, along with calibration protocol.

    General technical data

    Weight
    11 oz. / 320 g
    Reaction time
    t90 2 - 3 sec
    Dimensions
    7 x 2 x 1 in. / 190 x 40 x 28 mm
    Operating temperature
    5° to 104 °F / -15 to +40 °C
    Heat up time
    40 sec
    Battery type
    NiMH battery, 1600 mAh
    Battery life
    > 8 h
    Display type
    ppm display
    Storage temperature
    -13° to 158 °F / -25 to +70 °C

    Methane (CH₄)

    Measuring range
    0.1 to 4 Vol.%
    10 to 999 ppm
    Resolution
    1 ppm / 0.1 Vol.%
    Lower response threshold
    10 ppm

    Propane (C₃H₈)

    Measuring range
    0.1 to 1.9 Vol.%
    10 to 999 ppm
    Resolution
    1 ppm / 0.1 Vol.%
    Lower response threshold
    10 ppm