Image
    1. Home
    2. testo Smart App

    testo Smart App

    訂貨號 0501 5001
    testo Smart APP
    testo 420
    testo Smart App
    testo Smart App
    優勢
  1. 多合一:testo Smart App 與所有具有藍牙功能的 Testo 測量儀均可相容
  2. 快速簡便:適用于多種應用的測量功能表,為儀器設置和執行測量提供支援
  3. 可持續記錄特定時間段內的資料變化
  4. 即時顯示、記錄、分析、發送資料及報告
  5. testo Smart  APP 使您的移動設備成為遠端控制和測量資料中心。可實現多點同時檢測或同時獲得多參數的測量值,可記錄/圖表曲線顯示時間段的溫濕度變化,相關測量資料均可記錄保存或生成測量報告,無線範圍15米(取決於使用的移動設備)。

    描述

    當您對製冷設備、空調和供熱熱泵設備進行測量時,testo Smart App 可為您提供支援,它與所有具有藍牙功能的 Testo 測量儀均可相容。

    作為控制單元 testo Smart App 適用於以下測量儀器:
    • Testo Smart Probes 智慧探頭系列
    • testo 550s、testo 557s 和 testo 550i 數字冷媒表組
    • testo 552i 真空計
    • testo 770-3 鉗型表
    • testo 420 風量罩
    • testo 552 真空儀
    • testo 915i 空氣溫度計

    溫度、壓力、濕度和風量流速的測量較之以往將更靈活、更簡單。

    主要功能/優點(通過圖像/螢幕提供視覺化支援)
    - 適用于眾多應用領域的測量功能表,有助於快速、簡單地配置和執行測量
    - 以圖表方式直觀顯示測量值,可快速闡釋結果
    - 輕鬆創建包含圖片的電子版測量報告和文檔,並可通過電子郵件發送


    testo Smart App 的應用領域


    製冷設備、空調設備和熱泵:
    - 密封性測試:記錄和分析壓力曲線
    - 過熱和過冷:自動測定冷凝和蒸發溫度並計算過熱和過冷值
    - 目標過熱:自動計算目標過熱值
    - 真空測量:以圖表方式顯示測量變化過程,包含初始值和差值

    室內空氣品質和舒適度:
    - 溫度和濕度:自動計算露點和濕球溫度

    通風設備:
    - 通風管道測量:輸入通風管道橫截面的精確參數後,應用程式就可以全自動計算出體積流量。
    - 出風口測量:方便地對出口進行參數化設置(尺寸和幾何形狀);在調節通風設備時,可以對多個出口的體積流量進行交叉檢查和比較,定時和多點均值計算功能

    常規加熱設備
    - 溫度測量:通過以圖表方式顯示的變化過程辨識溫度變化;通過已存儲的材料清單輕鬆選擇發射率
     

    産品包含

    免費下載 testo Smart App 應用程式,適用于安卓系統和 iOS 蘋果系統。

    技術資料

    技術參數

    系統要求
    requires iOS 13.0 or newer; requires Android 8.0 or newer; requires mobile end device with Bluetooth 4.0

    應用

    Refrigeration systems, air conditioning systems, heat pumps

    • Tightness test: Recording and analysis of the pressure curve
    • Determination of high and low pressure, automatic determination of condensation and evaporation temperature and calculation of superheating/subcooling. All results can be read simultaneously on one screen
    • Automatic calculation of the target superheat
    • Measure vacuum: Graphic progression display of the measurement with indication of the start and differential value

    Indoor air quality and comfort level

    • Automatic calculation of the dewpoint and wet bulb temperature

    Ventilation systems

    • Duct measurements: Fully automatic calculation of the volume flow via the app after input of the duct cross-section
    • Outlet measurements: Easy parameterization of the outlet (dimensions and geometry), contrast and comparison of volume flows of several outlets when adjusting a ventilation system, continuous and multi-point mean calculation

    Conventional heating systems

    • Differential pressure measurement: Measurement menu for the pressure-drop test including alerts
    • Temperature measurement: Rapid detection of temperature changes via graphic progression display, easy selection of emissivity thanks to stored materials list